StarTech.com HDMI KVM Extender over IP Network - 4K 30Hz HDMI and USB over IP LAN or Cat5e/Cat6 Ethernet (100m/330ft) - Remote KVM Console

Meet the StarTech.com HDMI KVM Extender over IP Network, a high-performance solution engineered for professionals who demand seamless remote control of multiple computers. This 4K-capable KVM extender lets you extend HDMI video, USB peripherals, and keyboard/mouse signals over IP networks or standard Cat5e/Cat6 cables, delivering reliable, low-latency access to a remote PC or KVM switch up to 100 meters (330 feet) away. Designed to simplify data center management, broadcast setups, or lab environments, this extender makes centralized control practical without sacrificing performance or image quality.

• 4K at 30 Hz remote HDMI and USB extension: Enjoy crystal-clear, high-resolution video transmission up to 4K (4096x2160) at 30 Hz with virtually zero compromise on color accuracy or detail, perfect for diagnostic work, graphical data, and multi-monitor workflows. The HDMI signal is preserved with high fidelity, ensuring compatibility with a wide range of displays, capture cards, and presentation devices.
• IP-based KVM extension over Cat5e/Cat6: Extend HDMI video and USB 2.0 peripherals across an IP network or through standard Ethernet cables (Cat5e/Cat6). This design enables flexible placement of source and destination components, reducing clutter and enabling centralized control from a single console across rooms or even buildings.
• Remote KVM console access: Control your source computer as if you were sitting in front of it. The remote console capabilities allow you to manage BIOS settings, run maintenance tasks, and operate software with the same precision and responsiveness you expect from a physical desk setup.
• USB extension for peripherals: The extender carries USB keyboard and mouse input along with optional USB peripherals to the remote computer, enabling a complete KVM experience. This makes it ideal for IT administration, signage control, and media workflows that require peripheral devices at the distant end.
• Plug-and-play installation and scalable design: Implementing the system is straightforward with minimal setup steps, and the architecture supports expansion to multiple remote hosts. Whether you’re consolidating servers in a data center or managing lab workstations, the extender scales to your needs while maintaining consistent performance across all connected devices.

Technical Details of StarTech.com HDMI KVM Extender over IP Network

• Max Resolution: 4K (4096x2160) at 30 Hz over IP/HDMI
• Video Interface: HDMI (HDMI input at the transmitter, HDMI output at the receiver)
• USB Interface: USB 2.0 for keyboard/mouse and select USB peripherals
• Transmission: HDMI and USB signals carried over IP networks or Cat5e/Cat6 Ethernet cables
• Distance: Up to 100 meters (330 feet) between transmitter and receiver when using Cat5e/Cat6 Ethernet
• Networking: Uses standard IP networking for extension, with optional integration into existing LAN infrastructure
• Compatibility: Works with a broad range of HDMI-enabled displays, KVM switches, and USB peripherals
• Power: External power supplies required for the transmitter and receiver units
• Security: Supports typical network security measures and isolated operation within a controlled LAN environment

how to install StarTech.com HDMI KVM Extender over IP Network

• Step 1: Place the Transmitter near the source device (PC, KVM switch, or console) and connect its HDMI output to the source HDMI port. Attach USB peripherals to the transmitter as needed.
• Step 2: Place the Receiver near the display and remote console. Connect the HDMI input on the receiver to the target monitor or display. Attach the USB device(s) to the receiver if required for local use.
• Step 3: Connect the transmitter and receiver over Cat5e/Cat6 Ethernet cables or via an appropriate IP network segment. Ensure the cables are rated for the desired distance and environmental conditions.
• Step 4: Plug in the external power adapters for both the transmitter and receiver units. Powering both ends is essential to establish stable video and USB transmission.
• Step 5: Power on the source device and the display. Verify that the remote console can view the source video and interact with the USB peripherals through the remote KVM console.
• Step 6: If integrating with a larger KVM setup, connect the extender pair to a network switch or KVM management system as needed. Confirm network settings, such as IP addressing and subnet configuration, to ensure reliable performance across all remote endpoints.

Frequently asked questions

• Q: What distance can I expect with this HDMI KVM Extender over IP?

  A: The system supports up to 100 meters (approximately 330 feet) when using Cat5e/Cat6 Ethernet cables. Network topology and cable quality can influence practical distances, so verify your installation with a brief test in your environment.

• Q: Does this extender support 4K resolution?

  A: Yes. The extender is designed to deliver 4K video at 30 Hz, preserving sharp details and accurate color reproduction for high-resolution displays and professional workflows.

• Q: Can I extend USB peripherals beyond keyboard and mouse?

  A: The device provides USB 2.0 connectivity for keyboards, mice, and select USB peripherals. For heavier USB devices or high-bandwidth devices, verify compatibility with the specific USB class or device you intend to use.

• Q: Is the installation suitable for a data center environment?

  A: Absolutely. The extender is designed for centralized management and remote access, making it well-suited for data centers, server rooms, and lab environments where space optimization and remote monitoring are crucial.

• Q: Do I need special software to use this extender?

  A: The extender operates as a hardware-based KVM solution and generally does not require specialized software for basic operation. For enhanced management within a larger KVM ecosystem, integration with compatible management software may be available.